Description

USC Icing Lite (part #26012) is a premium, self-leveling gold finishing glaze used in auto body repair to fill minor scratches, pinholes, and skim coats up to 1/8-inch thick. It features Z-TEK adhesion booster and cures incredibly fast, resulting in a pinhole-free finish that sands easily without clogging your sandpaper. How to Mix and ApplyPrep the surface: Ensure the area is clean and dry. You can apply it directly over body filler, primed surfaces, fiberglass, steel, or aluminum. Mixing ratio: Dispense a roughly 4-inch puddle of the glaze on a mixing board and add a 2% ribbon of cream hardener (typically blue) from edge to edge. Mix thoroughly: Stir the hardener and glaze together until you achieve a completely uniform colour with no streaks. Application: Use a clean plastic spreader to apply firm pressure, forcing the glaze into the scratches and imperfections. Try to leave it as smooth and level as possible to reduce sanding time. Sanding: Let it cure for 10–15 minutes (until it's tack-free and hard to the touch). Sand with 180-grit to 220-grit sandpaper, feathering the edges until seamless.