File Belt 786F | Cubitron™ II | 3M | 33437 | 10 Units
3M

File Belt 786F | Cubitron™ II | 3M | 33437 | 10 Units

SKU: 33437

$49.95

✓ IN STOCK

1

Ships across Canada · free over $349

Same-day local delivery & pickup in Windsor

✓ Authorized Valspar & DeBeer distributor

Shop owner or body shop? See PRO pricing →

Description

The 3M File Belt 786F from the Cubitron II line, part number 33437, is a sanding belt made for power file sanders. This pack contains 10 belts, so you have fresh abrasive on hand for a full day of work rather than stretching one worn belt too far. Belts like this are used early in a repair. After body filler has been spread and has cured, a file belt knocks down the high spots and shapes the repair area quickly, before you move to finer sanding. That makes it a natural fit for dent repair, panel shaping and any job where filler needs to be levelled to match the surrounding metal. Body shops will appreciate the 10 unit pack because belts are a consumable that gets used up on every filler job. Keeping a stock on the shelf means a worn belt can be swapped out instead of pushing it past its useful life. DIY owners with a file sander can use the same belt on a weekend project, and a pack this size covers several repairs. A few practical tips apply to any file belt. Let filler cure fully before sanding so it does not clog the abrasive. Keep the sander moving and let the belt do the work instead of leaning on it, since heavy pressure creates heat and gouges. Work across the repair in long, even passes, and check the surface often with your hand and a guide coat so you do not cut through to the metal or leave low spots. Replace the belt once it stops cutting cleanly. Wear a dust mask and eye protection, because filler dust is fine and travels. A file belt is only the shaping step, so plan what comes next. Follow it with a finer grit on a block or a dual action sander to remove the deeper scratches, then apply primer surfacer and refine again before paint. Pair it with body filler, guide coat, sanding blocks, sanding discs and a particulate respirator filter so the whole sanding stage is covered. If you are not sure whether this belt matches your sander, check the belt dimensions against your tool before ordering. The 3M 33437 File Belt 786F can be picked up in Windsor, delivered in southern Ontario, or shipped across Canada from Auto's Supply Stop.

📦 Free shipping on orders over $349 CAD

📍 Pickup available: 2800 Jefferson Blvd, Windsor, ON

💳 Pay on pickup, e-transfer, or payment link

YEAR-END OFFER

10% OFF ALL PAINT

Pick up in person at our Windsor store and save 10% on all paint — now through December 31.

Business Hours

Mon – Fri 9:00 AM – 5:00 PMSaturday 10:00 AM – 12:00 PMSunday Closed
CALL AUTO'S