1K High Build Primer | Filler™ 5 IN 1™ | PF 637 | Light Grey
Pro Form

1K High Build Primer | Filler™ 5 IN 1™ | PF 637 | Light Grey

SKU: PF637

$27.95$32.95SAVE $5.00

✓ IN STOCK

1

Ships across Canada · free over $349

Same-day local delivery & pickup in Windsor

✓ Authorized Valspar & DeBeer distributor

Shop owner or body shop? See PRO pricing →

Description

Filler 5 IN 1 is a 1K high build primer from Pro Form, listed as PF 637 in light grey and supplied in a 425 gram can. A 1K product is a single-component primer, which means there is no hardener to measure or mix. That makes it a practical choice for smaller repairs where convenience matters. High build primers are designed to lay down a thicker film than a standard primer so that fine sanding scratches and minor surface imperfections can be levelled out before paint. On a typical repair, you apply the primer over properly prepared bare metal, filler or an existing sanded finish, let it dry as directed on the label, and then block sand it smooth to create an even base for basecoat or colour. DIY owners will find a 1K primer easy to work with, since there is nothing to mix and cleanup is simple. Body shops can keep it on hand for spot repairs, small parts and quick touch-ups where setting up a larger two-part system would not be worth the time. For larger panels or demanding jobs, check the label to see whether this is the right product for your project. Surface preparation decides how well any primer performs. Sand the area to the grit recommended for the product, clean it with a wax and grease remover, and mask the surrounding panels. If you are working on bare metal or over filler, make sure the area is fully prepared and free of dust. Apply in light, even coats rather than one heavy coat, allow the flash time stated on the can between coats, and keep the can moving to avoid runs. Shake it thoroughly beforehand, and work in a ventilated area while wearing a suitable respirator, gloves and eye protection. Pair PF 637 with sandpaper in the grits you need for blocking and finishing, a sanding block, a guide coat to show low spots, masking supplies, and a wax and grease remover. After sanding, you can move on to sealer or basecoat as the paint system instructions direct. Pro Form 1K High Build Primer PF 637 can be picked up in Windsor, delivered in southern Ontario, or shipped across Canada from Auto's Supply Stop.

📦 Free shipping on orders over $349 CAD

📍 Pickup available: 2800 Jefferson Blvd, Windsor, ON

💳 Pay on pickup, e-transfer, or payment link

YEAR-END OFFER

10% OFF ALL PAINT

Pick up in person at our Windsor store and save 10% on all paint — now through December 31.

Business Hours

Mon – Fri 9:00 AM – 5:00 PMSaturday 10:00 AM – 12:00 PMSunday Closed
CALL AUTO'S