
SKU: PF491
✓ IN STOCK
Ships across Canada · free over $349
Same-day local delivery & pickup in Windsor
✓ Authorized Valspar & DeBeer distributor
Shop owner or body shop? See PRO pricing →This is the 2K Urethane Primer Activator from Pro Form, supplied in a 946 ml size and listed as DTM, or direct to metal. It is used with a two component acrylic urethane primer. The manufacturer's description says the primer is high build, premium quality, and performs with most solvent and water based basecoat and clearcoat systems or urethane topcoats. An activator is the second part of a two part primer, and the primer will not cure correctly without it. Body shops use two part primers because they build thickness, fill sanding scratches and give a stable base for paint. DIY owners with a spray gun and good prep skills can use them as well, but they need to be comfortable working with two component materials and wearing the right safety equipment. In a typical job, the bare metal is cleaned and sanded, any filler work is finished, and then primer is mixed and sprayed in coats to build a level surface. Once it has cured, it is block sanded to remove low spots and imperfections, then sealed or topcoated according to your paint system. High build primers are used to level minor surface flaws, so they are useful before basecoat and clearcoat. Important: the mix ratio, reducer, pot life, flash time and cure time are set by the manufacturer, and we do not list them here. Read the technical data sheet and the label before mixing, and make sure you have the correct primer to go with this activator, since activators are matched to a specific product. Measure accurately with a mixing cup, stir well, strain the material and clean your gun right after use. Wear a supplied-air or properly fitted respirator, gloves and eye protection, because isocyanates and solvents are hazardous. Pair the activator with the matching Pro Form primer, a reducer where the data sheet calls for one, paint strainers, mixing cups and sticks, sandpaper in suitable grits, a guide coat, wax and grease remover, tack cloth and masking supplies. After priming and sanding, you can move on to basecoat and clearcoat. Pro Form 2K Urethane Primer Activator can be picked up in Windsor, delivered in southern Ontario, or shipped across Canada from Auto's Supply Stop.
📦 Free shipping on orders over $349 CAD
📍 Pickup available: 2800 Jefferson Blvd, Windsor, ON
💳 Pay on pickup, e-transfer, or payment link
Everything else you will need for this job.








Repair Box
Doing the whole repair? Get everything in one box, matched to your vehicle.
YEAR-END OFFER
10% OFF ALL PAINT
Pick up in person at our Windsor store and save 10% on all paint — now through December 31.
Business Hours